Golden Bricks Co. · Kakkar Majra, Ambala
Brick cladding for façades and interiors, fired at our own kiln
Thin clay tiles, 20 to 30 mm thick, that give a plastered wall the face of exposed brick. Smooth, textured and handmade, in terracotta, red, brown and dual tone, for house fronts, boundary walls, living rooms and cafés.
- Thickness
- 20 – 30 mm
- Sizes
- 9×3 · 9×2 · 9×1.5 · 6×3 in
- Finishes
- Smooth · Textured · Handmade
- Use
- Exterior and interior
The material
What is brick cladding?
Brick cladding is a thin facing of fired clay fixed to a wall that already stands. The structure behind it stays as it is: block, brick or concrete, plastered and sound. Our tiles are cut and pressed from the same clay as a full brick and fired in our kiln, so the colour runs right through each piece instead of sitting on top like paint.
Because the tile carries no load, it can go almost anywhere a wall tile can. On the outside that means elevations, stair towers, window bands, boundary walls and gate pillars. Inside, it means the wall behind a sofa or TV, a staircase, a café counter, an office reception. The same product is sold as brick tiles, brick slips, thin brick or exposed brick tiles; the idea is the same.
- Wall Existing masonry or concrete
- Plaster Sound, level, free of paint
- Adhesive Polymer-modified tile adhesive
- Tile 20 mm clay (25–30 mm handmade)
- Joint 8–12 mm grout or pointing
Try it
Brick cladding before and after, on your kind of wall
Drag the line across. The left side is plain painted plaster; the right is the same wall in the tile you pick. Switch between a living room and a house front.
Pick a tile
The cladded side uses our own photo of each tile on a wall. Real colour shifts a little with daylight, so ask for a sample before you order.
Ask about this tileThe lookbook
Brick cladding tiles, eight to start with
A short selection across the three series. Tap a tile for its size, colour and use, or see the full lookbook of 19 tiles with filters.
Applications
Brick cladding for exterior walls and for interiors
OutsideExterior brick claddingElevations, stair towers, window bands, boundary walls and gate pillars. What to use where the wall takes sun, rain and road dust.Read the exterior guide
InsideInterior brick claddingLiving room and TV walls, staircases, cafés, bars and receptions. Sizes and joints that look right from a metre away.Read the interior guide
Elevation designer
Brick cladding design, tried on a house front
Pick a part of the house, give it a tile or plaster, and change the joint colour. When it looks right, send the combination to us on WhatsApp.
In the field
Brick cladding projects
Apartment towers, villas, an institutional block, cafés and homes finished with clay tiles from our kiln. See every project photo.
01 Hillside apartment building with a full brick cladding façadeExterior
02 Four-storey institutional building clad in red brick tilesCommercial
03 Café wall in mixed red brick cladding with framed photographsCommercial
04 Two-storey villa with brick cladding panels between cream bandsExterior
05 Dining nook with a red brick cladding feature wallInterior
06 House front with brick-clad towers and a matching boundary wallExterior
07 Bar with brick cladding on the side wallsCommercial
Compared
Brick cladding against the usual alternatives
A plain comparison for an existing plastered wall. Costs vary by site, so ask a contractor to price the options for your drawings.
| Brick cladding | Face brick wall | Texture paint | Stone cladding | |
|---|---|---|---|---|
| On an existing wall | Yes, glued on plaster | No, it is the wall | Yes | Yes, heavier fixing |
| Added weight | Low (20–30 mm) | Full masonry wall | Negligible | Higher |
| Looks like real brick | Yes, it is fired clay | Yes | From a distance | No, a stone look |
| Repainting | Never | Never | Every few years | Never |
| Who installs it | Tiler | Mason | Painter | Tiler or stone fixer |
Ordering
How to order brick cladding tiles
- I
Measure the wall
Width × height in feet, minus doors and windows. The quantity calculator turns that into a tile count.
- II
Choose two or three tiles
Shortlist from the lookbook and ask for physical samples. Hold them against the wall in daylight.
- III
Get the quote
Send the area, the tile and your city on WhatsApp. We reply with the rate and freight to your site.
- IV
Dispatch and fixing
Tiles go by road from Ambala district. Your tiler fixes them with adhesive; our installation guide covers each step.
Where we deliver
Brick cladding supply across North India
Tiles leave our kiln in Ambala district by road. Each city page describes the walls and site conditions we hear about most from there.
Questions
Brick cladding questions, answered by the factory
Not covered here? Call +91-90411-00702 and speak to the factory.
What is brick cladding?
Brick cladding is a thin facing of kiln-fired clay, 20 to 30 mm thick, fixed to a plastered wall with tile adhesive. It gives the face of an exposed brick wall without building one. Because it carries no load, it can go on new or existing walls, inside or out.
Are brick cladding tiles the same as brick slips or thin brick tiles?
Yes, these are different names for the same idea: a thin slice of fired clay with a brick face. In India you will also hear exposed brick tiles, brick wall tiles and facing tiles.
How many brick cladding tiles are needed per sq ft?
With a 10 mm joint, about 4.5 tiles of 9×3 inch, 6.4 tiles of 9×2 inch, 8.1 tiles of 9×1.5 inch or 6.6 tiles of 6×3 inch cover one square foot. Add 5 to 10 percent for cutting and breakage. The calculator on our price page works it out for your wall.
Can brick cladding be used on exterior walls?
Yes. Fired clay handles sun and rain on elevations, boundary walls and pillars. Use an exterior-grade adhesive, make sure every tile is fully bedded, and apply a breathable water repellent after the joints cure.
Which sizes and thicknesses do you make?
Smooth and textured tiles come in 9×3, 9×2 and 9×1.5 inches, all 20 mm thick. The handmade series comes in 9×3 inches at 30 mm and 6×3 inches at 25 mm. Not every colour is made in every size, so check the lookbook.
What is the brick cladding price per sq ft?
It depends on the tile, the quantity and the freight to your site, so we quote each order separately. Send the wall area and your city on WhatsApp at +91 90411 00702 and we reply with a rate.
Can I see samples before ordering?
Yes. Ask on WhatsApp and we send physical samples, or visit the factory at Village Kakkar Majra, Distt. Ambala, Monday to Saturday between 9 AM and 6 PM.
Where do you deliver brick cladding?
We dispatch by road from Ambala district to Chandigarh, Mohali, Panchkula, Ambala, Karnal, Panipat, Punjab, Himachal Pradesh, Delhi, Gurugram, Noida and Ghaziabad. Other cities are possible; ask with your pin code.
Journal
From the brick cladding journal
Brick cladding vs face bricks: which suits your building?
Both give you an exposed brick wall. One is a facing you add later, the other is the structure itself. Here is how to decide.
Thin brick cladding tiles for walls: how many per sq ft, and why the joint matters
The joint width changes the tile count more than most people expect. Here is the arithmetic, worked out for every size we make.
Brick cladding, texture paint or ceramic wall tiles for a feature wall?
Three ways to get a brick-looking wall, and what each one is really like to live with.
Quote and samples
Get a brick cladding quote
Tell us the wall area, the city and the tile you are leaning towards. The form saves your details and opens WhatsApp with the message written, so it reaches the factory directly.
- Factory
- Village Kakkar Majra, Distt. Ambala, Haryana 134202
- Phone
- +91-90411-00702
- Hours
- Mon – Sat: 9 AM – 6 PM · Sun: Closed
